Agilent Technologies G1369C, Руководство пользователя, Страница: 24 / 66

24 G1369C LAN Interface User Manual
2 Getting Started
LAN Interface Card Configuration
Using Stored
When initialization mode “Using Stored” is selected, the parameters are
taken from the non- volatile memory of the card. The TCP/IP connection
will be established using these parameters. The parameters were
configured previously by one of the described methods.
Figure 13 Using Stored (Principle)
Using Default
When “Using Default” is selected, the factory default parameters are taken
instead. These parameters enable a TCP/IP connection to the LAN
Interface Card without further configuration, see
Table 6 .
Figure 14 Using Default (Principle)
Active
Parameter
Non-Volatile
RAM
Stored
Parameter
Default
Parameter
Active
Parameter
N O T E
Using the default address in your local area network may result in network problems. Take
care and change it to a valid address immediately.
Table 6 Using Default Parameters
IP address: 192.168.254.11
Subnet Mask: 255.255.255.0
Default Gateway not specified