Agilent Technologies 93000 SOC Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 640

Agilent Technologies 93000 SOC Series Скачать руководство пользователя страница 2

2

Agilent 93000 SOC Series User Training Part 1, October 2004

Name

Company

Location

Date

Notices

© Agilent Technologies
Deutschland GmbH, 2000-2004

No part of this manual may be reproduced in any
form or by any means (including electronic stor-
age and retrieval or translation into a foreign lan-
guage) without prior agreement and written
consent from Agilent Technologies, Inc. as gov-
erned by United States and international copy-
right laws.

Edition

Revision 4.2.1, October 2004

Printed in Germany

Agilent Technologies
Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen
Federal Republic of Germany

Warranty

The material contained in this document is pro-
vided “as is” and is subject to being changed,
without notice, in future editions. Further, to the
maximum extent permitted by applicable law,
Agilent disclaims all warranties, either express
or implied, with regard to this manual and any
information contained herein, including but not
limited to the implied warranties of merchant-
ability and fitness for a particular purpose. Agi-
lent shall not be liable for errors or for
incidental or consequential damages in con-
nection with the furnishing, use, or perfor-
mance of this document or of any information
contained herein. Should Agilent and the user
have a separate written agreement with war-
ranty terms covering the material in this docu-
ment that conflict with these terms, the
warranty terms in the separate agreement shall
control.

Technology Licenses

The hardware and/or software described in this
document are furnished under a license and may
be used or copied only in accordance with the
terms of such license.

Restricted Rights Legend

If software is for use in the performance of a U.S.
Government prime contract or subcontract, Soft-
ware is delivered and licensed as “Commercial
computer software” as defined in DFAR 252.227-
7014 (June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted com-
puter software” as defined in FAR 52.227-19
(June 1987) or any equivalent agency regulation
or contract clause. Use, duplication or disclosure
of Software is subject to Agilent Technologies’
standard commercial license terms, and non-
DOD Departments and Agencies of the U.S. Gov-
ernment will receive no greater than Restricted
Rights as defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive no
greater than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as applicable in any
technical data.

«
1
2
3
4
...
»

Содержание 93000 SOC Series

































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды