Agilent Technologies 35900E Series II, Руководство пользователя

Страница: 38 / 58

38 User Manual
5
Startup
Pre-Run Checklist
Before using the 35900E Series II with the operating software on the host
computer, make sure you have completed the following:
?
Rear Panel configuration switches 3 through 6 are DOWN (normal
operation)
?
RS-232 or LAN connection is correctly configured for host computer
communications
?
RS-232 or LAN cable connected to host computer or network
?
Analog signal cables connected
?
Remote control cables connected (if needed)
?
Digital I/O cables connected (if needed)
?
Power cord connected
35900E Series II Power Up
Power up the 35900E Series II by pressing the on/off switch (lower left corner
of the front panel).
• All indicators should turn off, except for
POWER
(on steadily).
• Some other indicators may turn on, depending on the instrument
configuration.
WA R N I N G
The power cord must be connected to an outlet with a protective earth contact to
ground the unit and minimize shock hazard.