8210–00011 R1
73
TO REGISTER A FOURTH REMOTE TRANSMITTER:
1. Switch OFF the receiver.
Important
Steps 2 and 3 must be done within 10 seconds of each other. The FAULT LED on the receiver flashes
for the duration of the registration window.
2. Switch ON the receiver.
3. On a 4th remote, press and release the ON button three times, then press the ON button and the Down-
Arrow Motion button at the same time and hold until the red light on the receiver SET LED illuminates solid
red. Release buttons. The remote is programmed, and should be set aside.
SWING-AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
