AGI Batco 1500 SA Series, Руководство оператора

Страница: 42 / 76

42 8210–00011 R1
Figure 18. Power Swing Receiver Box
DANGER
1
2 3
For Receiver Box Operation:
1. Using the direction switch, move the switch in the desired direction of travel (either F1 or F2).
2. Once finished moving the hopper, release the switch to stop operation (it should return to the neutral
position).
For Remote Transmitter Operation:
1. Push the green button (no symbol) to turn the remote ON ( Figure 16 ).
2. Push the yellow directional buttons (marked with arrows) located below the ON/OFF buttons in the
direction you want the hopper to move ( Figure 16 ).
3. If this does not work:
a. Push the red button (with an exclamation mark) to turn the remote OFF.
b. Then push the green button (no symbol) to turn the remote back ON.
4. Operate the remote as outlined above, using the two yellow directional buttons (marked with arrows)
located at the bottom of the remote to move the hopper as desired.
5. PLACEMENT SWING-AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR