8210–00011 R1
65
Figure 35.
Typical Cable Truss Assembly
2
7
1
6
1
1
3
4
5
7.20. Inspect and Service the Hydraulic Winch and Lift Cable
Place the conveyor in the fully lowered position with the cable slack.
To Inspect the Lift Cable:
1. Inspect the cable for damage such as fraying, kinking, or unwinding. Replace if damaged (see below).
2. Check to make sure the cable clamps are secure.
3. Oil the cable pulleys as needed.
4. Occasionally oil the bushings and drum shaft.
To Replace the Lift Cable:
1. Unwind the winch drum until the cable is slack and remove the cable clamps.
2. Free the cable from the winch and pulleys.
3. Remove the cable clamps that secure the hook in place.
4. Reverse the above steps to install the new cable.
SWING-AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
