AGFA 6012/001 Скачать руководство пользователя страница 78

Страница: 78 / 124

Using the remote control exposure button

The remote control is optional.

Ensure that there is no other equipment with remote control nearby.

Keep as fas as possible from the radiation source. The remote control operates
at a distance of maximum 11 m from the device at any angle and within sight,
through glass or leaded glass. The remote control doesn't operate through
doors or walls.

Point the remote control towards the remote control receiver on the

device.

Press and release the exposure button on the remote control.
The X-ray tube is prepared for performing an exposure.

Press the exposure button withing 15 seconds and keep it pressed until the

exposure has ended.
When the X-ray exposure is finished successfully, three beeps are heard.

WARNING:

During exposure ionizing radiation is emitted by the X-ray

system. To indicate the presence of ionizing radiation, the

radiation indicator on the control console lights up.

Return the remote control to its cradle.
The remote control produces a sound signal if it is not returned to its

cradle after three minutes.

Related Links

Infrared remote control

on page 28

| DR 100e (Digital Radiography) | Basic Workflow

0365B EN 20181015 0853

Содержание 6012/001





























































































































Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды

AGFA 6012/001, Руководство пользователя

Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды