manualshive.com logo in svg

AGFA 6012/001, Руководство пользователя

Поделиться
Скачать
AGFA 6012/001 Скачать руководство пользователя страница 77

Using the wired exposure button

Completely extend the cable of the exposure button and keep as fas as possible
from the radiation source. The cable of the exposure button can be extended
up to 4 m. Stretching it further can damage the cable.

1.

Press and hold the exposure button down to the first pressure point.
The X-ray tube is prepared for performing an exposure.
To start the exposure directly after preparation of the X-ray tube has

ended, immediately press the exposure button down fully.

2.

Press the exposure button down fully and keep it pressed until the

exposure has ended.
When the X-ray exposure is finished successfully, three beeps are heard.

WARNING:

During exposure ionizing radiation is emitted by the X-ray

system. To indicate the presence of ionizing radiation, the

radiation indicator on the control console lights up.

Related Links

Exposure button

 on page 27

DR 100e (Digital Radiography) | Basic Workflow | 

77

0365B EN 20181015 0853

Содержание 6012/001





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды