manualshive.com logo in svg

AGCO HayBoss G2 596, Руководство по эксплуатации

Поделиться
Скачать
AGCO HayBoss G2 596 Скачать руководство пользователя страница 8

 
 
For AGCO part cross-reference visit: www.harvesttec.com/system.html 

 

8 

Connecting power and communication harnesses 
 

The power (006-5650A & 006-5650B) and communication (006-5650C & 006-5650D) harnesses are color coded.  The 
power harnesses are color coded red, the communication harnesses are grey.   Always connect the communication 
harness first and the power second.  The power harness should be disconnected whenever service work is to be done to 
the baler or applicator.   
 
The harnesses are located at the front of the baler near the hitch and at the back of the tractor near the drawbar.  See 
arrow below.  Make sure all connection wires are free between the hitch of the baler and the back of the tractor, especially 
when tractor is turning away. 
 

WARNING: Stop tractor engine and shift to park or neutral, set brakes and remove key before leaving the tractor.

 

 
 

 

 
Operation of the main ball valve 
 

The ball valve shall be closed at all times when the applicator is not being used.  The valve shall also be closed when any 
service work is being done to the baler or applicator.   
 
The ball valve is located on the left side of the baler, connected to the pumping manifold.  See arrow below. 

 

Open valve position 

Closed valve position 

Содержание HayBoss G2 596

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды