manualshive.com logo in svg

AGCO HayBoss G2 596, Руководство по эксплуатации

Поделиться
Скачать
AGCO HayBoss G2 596 Скачать руководство пользователя страница 63

 

63

WARRANTY AND LIABILITY AGREEMENT 

 

Harvest Tec, Inc. will repair or replace components that are found to be defective within 
12 months from the date of manufacture.  Under no circumstances does this warranty 
cover any components which in the opinion of Harvest Tec, Inc. have been subjected to 
negligent use, misuse, alteration, accident, or if repairs have been made with parts other 
than those manufactured and obtainable from Harvest Tec, Inc.   
 
Our obligation under this warranty is limited to repairing or replacing free of charge to the 
original purchaser any part that in our judgment shows evidence of defective or improper 
workmanship, provided the part is returned to Harvest Tec, Inc. within 30 days of the 
failure.  Parts must be returned through the selling dealer and distributor, transportation 
charges prepaid.   
 
This warranty shall not be interpreted to render Harvest Tec, Inc. liable for injury or 
damages of any kind, direct, consequential, or contingent, to persons or property.  
Furthermore, this warranty does not extend to loss of crop, losses caused by delays or 
any expense prospective profits or for any other reason.  Harvest Tec, Inc. shall not be 
liable for any recovery greater in amount than the cost or repair of defects in 
workmanship.   
 
There are no warranties, either expressed or implied, of merchantability or fitness for 
particular purpose intended or fitness for any other reason.   
 
This warranty cannot guarantee that existing conditions beyond the control of Harvest 
Tec, Inc. will not affect our ability to obtain materials or manufacture necessary 
replacement parts.   
 
Harvest Tec, Inc. reserves the right to make design changes, improve design, or change 
specifications, at any time without any contingent obligation to purchasers of machines 
and parts previously sold. 
 
Revised 01/03/06 

 

 

 

 

 

 

Содержание HayBoss G2 596

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды