manualshive.com logo in svg

AGCO HayBoss G2 596, Руководство по эксплуатации

Поделиться
Скачать
AGCO HayBoss G2 596 Скачать руководство пользователя страница 18

 
 
For AGCO part cross-reference visit: www.harvesttec.com/system.html 

 

18 

Baling rate 

 
After pushing the SETUP MODE key in the Main Menu screen, the top screen should appear: 
 

 

 

 

 

1.  On this screen the operator will press the BALING RATE key.   
2.  Press the underlined number to the right of AVG Bale Weight (Lbs): to adjust the weight of your bales.  The key 

pad shown will display.  Press any number combination in this screen within the min/max limits.  Press the 
ENTER key to save this information.  The information will remain until it is changed again.    

3.  Press the underlined number to the right of AVG Bale Length (In): to adjust the length of your bales.  The key pad 

shown will display.  Press any number combination in this screen within the min/max limits.  Press the ENTER 
key to save this information.  The information will remain until it is changed again.    

4.  Press the underlined number to the right of EST Baling Time (Sec): to adjust the time it takes to make a bale.  

The key pad shown will display.  Press any number combination in this screen within the min/max limits.  Press 
the ENTER key to save this information.  The information will remain until it is changed again.  

5.  Press the underlined number to the right of Knotter/Star to adjust the distance between the knotter and star 

wheel.  To determine the distance, measure between the center of the starwheel and the center of the knotter.     

6.  If the unit will be operated with the bale sensors on

,

 then the bale weight and length will need to be inputed.  

When the bale rate sensors are: ON, the applicator will calculate your tons per hour.  When the Bale Rate 
Sensors are:

 

OFF  a constant tons per hour ( your inputed bale weight and time) will be used.  Operating the unit 

with the Bale Rate Sensors: OFF will cause total tons per hour in Job Records to be left blank.  Press the 
underlined word to toggle between ON or OFF. 

7.  Next press the BACK key found on the bottom left hand of the screen to return to the Setup Mode screen, or 

press the MAIN MENU key on the bottom right hand of the screen to return to the opening screen. 

8.  Press the OPTION key to adjust the touchscreen between metric and standard units and languages.  The Hay 

Indicators can also be turned on or off in the OPTION screen.  Press the underlined ON/OFF next to EOR. 

1 

2 

3 

4 

5 

6 

7 

7 

8 

Содержание HayBoss G2 596

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды