Menu “Measure”
42
MAXILYZER NG Plus
Function „Hold“
Register
Key
Function
Keep measured data.
Press the key again to stop the HOLD-
Function.
If the HOLD-Function is activated all displayed measured data at the
time the key was pressed will be kept. If the HOLD-Function is acti-
vated the alert “HOLD” appears in the top left corner of the status li-
ne in exchange with the name of the fuel.
Function “Zoom”
There are two fonts and therefore types of layout available:
•
10 lines layout:
The 10 lines layout is the standard layout set
by the producer. Measured parameters are shown on the left
whereas readings and units are shown on the right.
•
5 lines layout:
This layout reduces the number of displayed
lines but it facilitates the reading of the display from a bigger dis-
tance. Measured parameters and units are on the left whereas
readings are on the right.
After the device is switched off and on again the display resets to the
10 lines layout automatically unless the 5 lines layout was a meas-
urement configuration activated by a macro.
Operate the function “Zoom”.
