AFP Imaging Mini-Medical Series, Инструкция по установке, эксплуатации и сервисному обслуживанию

Страница: 36 / 132

Installation
Mini Med Series 0000061122
Batch Mode
In “Batch” mode the replenisher will be recycled from the replenisher supply to the pro-
cessing tank and will then, via the tank overflow port, return to the replenisher supply to be
recycled again. As the chemical's processing strength becomes depleted, the entire batch is
disposed of and new chemistry installed.
To install the processor for “Batch” mode replenishment operation proceed as follows:
(See Figure 2-3)
1) Route the red developer replenisher pickup tube from the developer replenisher pump to
the developer replenishment reservior or to a container of developer replenisher.
2) Route the red developer drain line and red overflow line from the processor to the same
container as the developer replenisher pickup tube.
3) Route the blue fixer replenisher pickup tube from the fixer replenisher pump to the fixer
replenishment reservoir or to a container of fixer replenisher.
4) Route the blue fixer developer drain line and blue overflow line from the processor to the
same container as the fixer replenisher pickup tube.
Figure 2-3, Batch Mode Operation
2-6
FIX
DEV
To Drain
To Repl. Pump (s)