AFP Imaging Mini-Medical Series, Инструкция по установке, эксплуатации и сервисному обслуживанию

Страница: 18 / 132

Introduction
Mini Med Series 0000061122
Operation
The processor is operated from the control panel. Basic processor functions are described
in the following paragraphs. Figure 1-2 is a diagram of the transport system.
Capabilities
Mini-Medical processors develop, fix, wash and dry exposed RP type medical X-ray films
of all sizes, from 4" X 4" (10 X 10 cm) to 14" X 36" (35 X 91 cm).
Hourly production capacity of 14" X 17" (35 X 45 cm) sheets of film, at the indicated, pre-
set, lead edge in to lead edge out time, is:
Model Lead-to-Lead Productivity
Mini-Medical 130 sec 55 sheets per hour
Mini-Medical/90 90 sec 85 sheets per hour
Mini-Medical/EP 180 sec 42 sheets per hour
Transport System
Four removable roller rack modules transport the material being processed through the
developer, fixer, wash and dryer sections.
The developer, fixer and wash sections make use of “Deep Tank” racks to maintain devel-
oping quality and improve productivity. The dryer section includes a long path length
vertical dryer to assure material drying at short developing times, reduce space require-
ments and return the film to the operator’s position for ease of pick-up.
All racks and rollers in the wet sections and dryer are driven from a common drive shaft by
a fractional horsepower ac motor.
For ease of use, and accuracy of processing, developing times and developing temperatures
are factory set at the following values:
Model Dev. Time Developer Temp.
Mini-Medical 29 sec 90 Degrees f (32 C.)
Mini-Medical/90 22 sec 95 Degrees f (35 C.)
Mini-Medical/EP 44 sec 95 Degrees f (35 C.)
1-2