Fix:
To fix this error, you must first power off the plotter, turn the plotter back on, wait for
the display on the plotter to load, then press the number “2” as instructed on the plotter
to complete the set-up.
Plotter error “E01019 Hardware Y Position Alarm Power off then on”
Fix:
Before feeding the material through the plotter (While the rear lever is in the down
position) be sure that the pinch rollers are aligned properly with the plotter’s grips.
Plotter error “E05004 Hardware Realign Push Rollers Confirm”
Problem:
The plotter displays an error
“E01019 Hardware
Y Position Alarm Power off then on”.
Cause:
This error occurs when the blade tray was moved
from side to side by the user after loading the media onto
the plotter and with the rear plotter lever in the up position.
Problem:
The plotter displays an error
“E05004 Hardware
Realign Push Rollers Confirm”
Cause:
This error occurs when the pinch rollers are not
aligned properly with the plotter’s grips.
34
