26
ADAPTOR FOR THE DLF DLF-350L AND DLF-350L MODELS
In order to use narrower media on the
DLF DLF-350L, apply the adaptor onto
the core holder first, then load your
narrower media.
HOW TO INSTALL PRESSING ROLLER
The pressing roller facilitates the
matrix removal from the die-cut roll.
How to install the roller:
Unscrew the 10 screws on the matrix
remover module.
1
Position the matrix remover roller
onto the matrix remover module and
secure it properly with the 10 screws.
2
HOW TO USED THE O-RING ON THE MATRIX ROLLER
The o-rings of the matrix remover
roller are used to facilitate the removal
of your matrix from the labels.
Place one or more o-rings (depends
on the width of the label) at the center
of the die-cut label.
Then proceeds with the normal loading
of the media. (pag. 11)
