AFINIA LABEL DLF-220L Скачать руководство пользователя | Manualshive

Страница: 19 / 41

background image

If the plotter is not connected correctly to the computer, the following errors will be

displayed at the application launch:

Make sure the plotter is switched on and properly connected.

In case it is turned off, please turn the plotter on and than press

the button 2 on control panel and wait until the display will show

“READY” as status. Then press retry on the popup window.

Load properly the media and rise the lever on the plotter, than

press the button 2 on control panel and wait until the display will

show “READY” as status. Then press retry on the popup window.

wrong

poSition

CorrECt

poSition

For a correct functionality and prevent any issue, it is mandatory to have the camera

reading properly the black-mark.

Press ARROW buttons to move the media until the black-mark goes in the center position

of the blue rectangle’s area. If necessary, it is possible to slide the camera to left or to right

in order to get the black-mark centered as much as possible.

Cutting files: Adobe Illustrator or and Corel Draw (PDF).

The artwork file within the cutting shape must be equipped with a register square

black-mark having a size of 4x4mm (0.16”x0.16”) or 2x2mm (0.08”x0.08”).

In the “cutting file” the cutting shape and black-mark (not for the blank labels) only

must be saved. Graphic is not required to be saved.

If the file is using few drawing layers, it is not enough to disable the view of them, the

grapich layers must be deleted or the profile shape must be copied in a new file and

saved.

18

ERROR MESSAGES

BLACK-MARK DETECTION

CUTTING FILE SPECIFICATIONS

«
...
17
18
19
20
21
...
»

Содержание DLF-220L










































Отзывы:

Нет отзывов

Похожие инструкции для DLF-220L

Бренд: Landis Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды