MovE
thE
Cutting
filE
-
y
+
x
+
y
-
x
cutting direction
- Once the cut settings are properly set, select “
COPY MODE
”
ON
if you desire a preset
quantity of copies or
OFF
if you desire unlimited copies until the media roll is finished.
- Set the black-mark size” in “
BLACK-MARK MODE
” area.
- Press “
START
”.
IMPORTANT:
Whenever you lower and rise the lever while you are in black-mark
mode, wait until the plotter head has moved to the right.
>> How to run the blank mode
-Press “
OPEN PDF
” or “
OPEN LAST JOB
” to load the cutting file.
-Set the copy mode
ON
, and set 2 as number of copies.
-Click “
START”
.
-Check the horizontal position and the gap between the cuts.
-If necessary adjust the offset X and the distance between each cut in “
STEP BOX
”.
-Once the cut is set properly, select copy mode: ON if you desire a preset quantity of
copies or OFF if you desire unlimited copies until the media roll is finished.
-Working with
DLF-220L
or
DLF-350L
models, please open Advanced button, click on
Settings and uncheck Media/Lamination Sensor option, then save and close the pop up.
-Click “START”.
10
