1.
Cutting file preview
2.
Open and load cutting file
3.
Open and load the previous cutting file used
4.
Status bar
5.
Start/stop the cutting process. (In black-mark mode, the cutting process moves to the
next black-mark after the cut test)
6.
Pause/resume the cutting process
7.
Run one cut at time to check the values set, feature available in black-mark mode only.
8.
Arrow buttons to move the media forward or backward
9.
Increase or decrease the cut force
10.
Increase or decrease the cutting speed
11.
Offset adjustment
12.
Current camera view
13.
Screenshot of the previous black-mark detected
14.
Preset quantity of labels to be cut (on) or cut to end/manual stop (off)
15.
Number of labels cut
16.
Set the gap between black-marks (top to top)
17.
Set black-mark size
18.
Enable blank media mode (no black-mark printed)
19.
Set the gap between each artwork to be cut in blank media mode
20.
Advanced options
MovE
down
thE
Cutting
filE
MovE
to
thE
right
thE
Cutting
filE
MovE
up
thE
Cutting
filE
MovE
to
thE
lEft
thE
Cutting
filE
-
y
+
x
+
y
-
x
cutting direction
16
