11
•
After replacing an electrical system component, check it is
correctly wired.
GAS FRY-TOP WITH TAP
Replacing the gas tap.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the burner, the pilot burner, the thermocouple,
the piezoelectric ignition and the igniter.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
GAS FRY-TOP WITH VALVE
Replacing the gas valve and safety thermostat.
•
Remove the control panel.
•
Remove the bulb from its seat on the bottom of the hotplate.
•
Remove and replace the component.
•
Insert the bulb properly in its seat on the bottom of the hotpla-
te.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the burner, the pilot burner, the thermocouple,
the piezoelectric ignition and the igniter.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC GRIDDLE PLATE
Replacing the heating element and the indicator light.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
•
Remove the control panel.
•
Remove the bulb from its seat on the bottom of the hotplate.
•
Remove and replace the component.
•
Insert the bulb properly in its seat on the bottom of the hotpla-
te.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC OVEN
Replacing the knob and indicator light.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
•
Remove the control panel.
•
Remove the bulb from its seat on the side of the oven.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the heating element
• Remove the oven floor (only for lower heating elements) or
the higher protection (only for higher heating elements).
•
Undo the screw securing the element to the oven and pull the
element out by approx. 5 cm.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
17 CLEANING THE INTERIOR
•
Check the condition of the inside of the appliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
GAS FRY-TOP WITH TAP
•
Gas tap
•
Main burner
•
Pilot burner
•
Thermocouple
•
Igniter
•
Piezoelectric ignition
GAS FRY-TOP WITH VALVE
•
Gas valve
•
Main burner
•
Pilot burner
•
Thermocouple
•
Igniter
•
Piezoelectric ignition
•
Safety thermostat
ELECTRIC GRIDDLE PLATE
•
Working thermostat
•
Safety thermostat
•
Heating element
•
Indicator light.
ELECTRIC OVEN
•
Control knob
•
Working thermostat
•
Safety thermostat
•
Heating element
•
Indicator light.
