AFG 18.1AXT, Руководство пользователя

Страница: 8 / 69

14 15
ASSEMBLY STEp 5
A Open
hardware for step 5
.
B
Run Console Cables from main frame
braCket through the Console mast .
C
Attach Console mast to the main
frame braCket using 4 bolts (C) and 4
washers (l) .
D
Attach the Console Cables to the
Console .
E Carefully tuck the C onsole Cables into
the Console mast before attaching the
Console . Attach Console to Console
mast
using 4
pre-attaChed bolts
.
F
Attach water bottle holder to
Console mast using 2 pre-attaChed
bolts .
BOLT (C)
16 mm
Qty: 4 WASHER (L)
18 mm
Qty: 4
HARdWARE fOR STEp 5 :
PRE-ATTACHED
BOLTS
PRE-ATTACHED
BOLTS
WATER BOTTLE
HOLDER
CONSOLE MAST
BOLTS (C)
CONSOLE CABLES
MAIN FRAME
BRACKET
CONSOLE
WASHER (L) CONSOLE CABLES
ASSEMBLY STEp 6
A Open
hardware for step 6
.
B
Attach each footpad to the footpad support
on each link arm using 4 bolts (k) and 4
washers (l) .
C
Repeat on opposite side.
WASHER (L)
18 mm
Qty: 8 BOLT (K)
12 mm
Qty: 8
BOLT (C)
16 mm
Qty: 2 WASHER (P)
38 mm
Qty: 2 WAVY WASHER (M)
34 mm
Qty: 2
HARdWARE fOR STEp 6 :
BOLTS (K)
WASHERS (L)
LINK ARM
FOOTPAD
NOTE: Be careful not to pinch any wires while attaching the
console mast or console.
181AXT_OM_Rev1_6.indd 14-15 7/22/11 2:28 PM