12
13
ASSEMBLY STEp 3
A
Open
hardware for step 3
.
B
Attach each
top handrail
to the
inCline
arm
using 4
bolts (f)
and 4
nuts (g)
. To
make assembly easier, lightly tighten all four
bolts to begin, then tighten firmly after all bolts
have been started.
C
Tighten all hardware from ASSEMBLY STEP 2.
BOLT (F)
25 mm
Qty: 4
NUT (G)
8 mm
Qty: 4
HARdWARE fOR STEp 3
:
INCLINE ARM
BOLTS (F)
TOP HANDRAIL
NUTS (G)
ASSEMBLY STEp 4
A Open
hardware for step 4
.
B Slide 1
wavy washer (J)
onto each
handlebar
shaft
.
C Slide the
left lower handlebar
onto the
handlebar shaft
. Be sure the
left lower
handlebar
is positioned the same as shown in the
diagram.
D Slide the
left upper handlebar
onto the
handlebar shaft
. Using 4
bolts (h)
connect
the
upper and lower handlebars
as shown
in the diagram. Do not tighten any bolts until all 4 are
started.
E Secure the
handlebar assembly
using 1
washer (i)
and 1
bolt (C)
. NOTE: be sure to
attach
washer (i)
as shown in STEP E diagram.
F Repeat steps B–E on the opposite side.
BOLT (H)
20 mm
Qty: 8
WASHER (I)
34 mm
Qty: 2
BOLT (C)
16 mm
Qty: 2
WAVY WASHER (J)
23 mm
Qty: 2
HARdWARE fOR STEp 4
:
BOLTS (H)
BOLT (C)
WASHER (I)
MAIN FRAME
RIGHT UPPER
HANDLEBAR
LEFT UPPER
HANDLEBAR
REAR MAST COVER
HANDLEBAR SHAFT
WAVY WASHER (J)
LEFT LOWER
HANDLEBAR
RIGHT LOWER
HANDLEBAR
BOLT (C)
WASHER (I)
STEp E dIAGRAM
181AXT_OM_Rev1_6.indd 12-13
7/22/11 2:28 PM
