Afag PDZ-128, Перевод оригинальной инструкции по монтажу

Страница: 30 / 58

30 PDZ-128-160-200 OI-vers. 3.2 gb. 03.07.2018
3.1.6 Module description and construction
The gantry axes function according to the slide principle, i.e. the carriage moves
linearly opposite to a rigid drive unit (axis).
The drive unit with mounting flange (7), gearbox (3) and motor (4) is rigidly mounted
and thus is not included in the moving mass of the system.
The system consists of an axis (1), the carriage (2), the gearbox (3) and the motor
(4).
The carriage (2) has two PDZ linear guides (5). The belt (6) is inside the axis (1). The
toothed belt guide pulleys (8) are at the axis end pieces. The toothed belt is clamped
under the carriage. The clamping devices (9) are also located here.
Planetary or angular gears of different accuracy classes can optionally be fitted. The
drive shaft is connected to the guide pulley free of play by a clamping set (10). The
reference switch is an inductive sensor which recognises the zero position of the
carriage during the reference run.
2
1
3 4
6
9
8
5 8
7
10