AETNAGROUP ROBOPAC STARBOX 50 Скачать руководство пользователя страница 43

Страница: 43 / 54

- 39 -

English

7.1.

maintenance inStructiOnS

‒

a good maintenance will allow for a longer working life and

constant compliance with the safety requirements.

‒

Before performing any operation, the authorised operator must

make sure that he/she understood the “instructions for use”.

‒

pay attention to the Safety WarninGS, do not use the

machine for unSpecified purpOSeS and assess the possible

reSidual riSkS.

‒

carry out the interventions with all the safety devices enabled

and wear the dpi provided.

‒

mark the intervention area and prevent access to the devices

that, if activated, may cause unexpected hazards and jeopardize

the safety level.

‒

dO nOt carry out any intervention that is not described in the

manual but contact an assistance Service authorised by the

manufacturer.

‒

dO nOt damp in the environment materials, pollutant liquids

and the residues created during the interventions but dispose

them according to the standards in force.

‒ Before carrying out any maintenance work, turn off the electric

power supply.

Chapter 7
MAINTENANCE INforMATIoN

Содержание ROBOPAC STARBOX 50























































Результаты поиска

Содержание ROBOPAC STARBOX 50

Отзывы:

Похожие инструкции для ROBOPAC STARBOX 50

Бренды по названию

Популярные бренды

AETNAGROUP ROBOPAC STARBOX 50, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание ROBOPAC STARBOX 50

Отзывы:

Похожие инструкции для ROBOPAC STARBOX 50

Бренды по названию

Популярные бренды