AETNAGROUP ROBOPAC STARBOX 50 Скачать руководство пользователя страница 18

Страница: 18 / 54

- 14 -

English

Chapter 2

SAfETy INforMATIoN

2.6.

Safety WarninGS fOr reGulatiOnS and

maintenance

– Keep the machinery in maximum efficiency condition and perform

all the scheduled maintenance operations provided for by the

manufacturer.

Proper maintenance will provide the best performance, a longer life

span and constant compliance with safety requirements.

– Enable all machine safety devices before performing any maintenance

and regulation operations.

– Delimitate the work area complying with the safety conditions as

provided by the standards on workplace safety in order to minimise

the risks.

– The maintenance interventions in the areas that are not easily

accessible or dangerous must be carried out after having ensured

the necessary conditions.

– The personnel authorised to carry out the ordinary maintenance

(regulations, replacements etc.) Must possess the necessary

technical and professional knowledge.

– Do not carry out interventions different from those indicated in the

user manual without the written consent of the manufacturer.

– Do not use products that contain corrosive, toxic and inflammable

substances.

– wear the individual protection devices provided by the laws on

workplace safety and indicated in the “instructions for use” and/or

affixed to the machine.

– replace the components only with original pare parts or with similar

design and functional features.

– The use of similar but non-original spare parts may lead to improper

repairs, altered performance and economic damage.

the components and/or safety devices shall be replaces

only with original spare parts to avoid altering the provided

safety level.

– Use lubricants (oils or grease) recommended by the manufacturer

or with similar chemical-physical features.

– Do not dump into the environment polluting liquids, worn parts and

maintenance waste.

– Select the components according to the chemical and physical

features of the material and carry out the differentiated waste

disposal as per the standards in force.

– All the extraordinary maintenance interventions shall be carried out

exclusively by authorised personnel with particular expertise in the

field of intervention.

non compliance with the instructions given may cause risks

for safety and health of the persons and economic damages.

Содержание ROBOPAC STARBOX 50























































Результаты поиска

Содержание ROBOPAC STARBOX 50

Отзывы:

Похожие инструкции для ROBOPAC STARBOX 50

Бренды по названию

Популярные бренды

AETNAGROUP ROBOPAC STARBOX 50, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание ROBOPAC STARBOX 50

Отзывы:

Похожие инструкции для ROBOPAC STARBOX 50

Бренды по названию

Популярные бренды