AETNAGROUP ROBOPAC STARBOX 50, Руководство по эксплуатации и обслуживанию

Страница: 24 / 54

- 20 -
L
English
Chapter 3
TEChNICAL INforMATIoN
3.2. deScriptiOn Of the OperatiOn
cycle
1. withdraw a carton from the hopper
and, keeping it horizontally, let the
rear flap lean on the tilted table.
when pressing the rear flap
on the tilted table, the box
contemporaneously begins to
rotate so that the top flap leans
on the work table. when the top
flap leans on the table, always
keeping the carton tilted, press
downwards until the carton leans
on the work table.
2. Direct the box towards outfeed,
until it reached the sheet steel
sensing panel (l) .
In this way, the work cycle begins.
3. Close the two bars that block the
carton; the two sheet steel panels
start and close the side flaps.
The operator must keep the carton
pressed on the work table.
If the flaps are very precise
(lengthwise they gaze the central
sheet steel panel making closure
difficult), the operation can be
facilitated by performing slight
forward and backward rotations
keeping the box pressed on the
table.