ScoopTeam - User manual - Draft 0002
41
4.3.6.
“Aux Settings” page
Access level: Expert
This page allows selecting the auxiliary inputs which contribute to the
Program
and
Coordination
mix
buses.
The page includes the following areas and items:
1.
Status panel, in a compact variation, without the bargraphs for the level of the received audio
signals (Program and Coord feedback). Refer to chapter 4.5.1, Status panel for details about the
status panel.
2.
“Home” button: touch the button to go to the “Home” page.
3.
Buttons corresponding to the aux inputs, and showing the labels assigned to the sources. These
buttons are grey to indicate that they can be used for configuring the labels.
To do this, touch the button to be configured. A virtual keyboard pops up; there you can edit the
current label and/or enter the new label, and touch “OK”. This label is associated to the selected
aux input all over the user interface. If the label is left blank, only the source name is displayed
everywhere.
4.
Routing switches: on each input channel:
- A virtual switch selects the signal for sending to the
Program
bus; touch the switch to toggle it
on/off.
It is possible to assign one of these switches to a function key, and in this way get instant
control over the switch. See chapters 2.5.6 and 3.2.2
- Another virtual switch selects the signal for sending to the
Coordination
bus (Coord.); touch
the switch to toggle it on/off
.
5.
“Input Settings” button: touch the button to go to the “Input Settings” page, described above
(“Input Settings” page).
6.
“Aux Settings” button: this button has a black background to remind that this is the current
page.
1
2
5
8
3
6
7
4
