ScoopTeam - User manual - Draft 0002
39
4.3.5.
“Input Settings” page
Access level: Expert
This page gives access to the settings for the audio inputs 1 to 4.
The page includes the following areas and items:
1.
Status panel, in a compact variation, without the bargraphs for the level of the received audio
signals (Program and Coord feedback). Refer to chapter 4.5.1, Status panel for details about the
status panel.
2.
“Home” button: touch the button to go to the “Home” page.
3.
Buttons corresponding to inputs 1 to 4, and showing the labels assigned to the sources. These
buttons are grey to indicate that they can be used for configuring the labels.
To do this, touch the button to be configured. A virtual keyboard pops up as on the picture
below:
There you can edit the current label and/or enter the new label, and touch “OK”. This label is
associated to the selected input all over the user interface.
If the label is left blank, only the
source name is displayed everywhere.
1
2
6
9
3
7
8
5
4
