6
ScoopTeam - User manual - Draft 0002
2.1.6. USB audio interface (
NYA
)
This interface is a “device” interface, for a connection with a USB host such as a computer, with
following features:
Mini-B USB socket located on the back
One input channel and one output channel
Input gain control -30dB to +16dB, 1 dB steps
All parameters controllable by remote
2.1.7. RAVENNA interface (
NYA
)
This interface is only available on the “premium” version, and has the following features:
Ethernet 10/100BaseT, RJ45 socket located on the back
Two input channels (selectable from the source stream) and two output channels
Input gain control -30dB to +16dB, 1 dB steps (for each channel, independently)
All parameters controllable by remote
2.1.8. Line output
This output has the following features:
Balanced output, 3-pin male XLR, located on the back
Full scale level adju4 dBu to +22 dBu, 1 dB steps
All parameters controllable by remote
2.1.9. Headphone outputs
Four outputs are available for monitoring. Each has the following features:
6.35 mm jack located in the front panel
Volume control with a dedicated knob
Flexible routing: see further
2.1.10. Mixing capabilities
The various audio sources are mixed to produce:
The program and coordination output signals. An adjustable compressor/limiter (
NYA
) is
applied on the program mix.
Monitoring outputs to the headphones.
Outputs to the audio output interfaces.
The sources for mixing include:
The signals from the local audio input interfaces, as listed previously (including the USB and
RAVENNA interfaces), after the gain setting and possible channel processing.
The feedback channels from the program link and the coordination link (Program FB and
Coord FB).
