9
USA
6.1.2
Connecting the power supply
DANGER
Risk of death by electric shock!
►
Connect the product only to a grounded power supply.
Note
The mains voltage must correspond to the voltage indicated on the type
plate at the back of the unit.
►
Plug in the power cord at power cord socket
13
.
►
Connect power supply by inserting into a wall socket.
6.1.3
Switching on the control unit
►
Activate the power ON switch
10
.
The power ON indicator
9
and indicator light
5
light up.
The control unit
1
always performs a power-on self-test when the unit
is switched on.
If a malfunction is detected, an error message will appear in the
display
2
, see system errors.
6.1.4
Switching off the control unit
►
Activate the power OFF switch
8
.
The power ON indicator
9
, the indicator light
5
and the display with
touch control panel
2
will fade out.
6.1.5
Putting out of operation
Note
The safe and all-pole disconnection of the product from the main power
supply is only guaranteed when the power cord is unplugged.
►
Switching off the product: Activate the power OFF switch
8
.
►
Unplug the power cord from the power socket
13
.
The operation of the device is safely terminated.
6.1.6
Connecting the ELAN 4 electro to wireless foot control
GA810
The system configuration menu is used to connect the wireless foot con-
trol to the control unit, see Chapter 6.4.4
6.1.7
Connecting the ELAN 4 electro foot control GA808 to the
control unit
Note
The plug connection of the foot control has a yellow coded ring and a filled-
in dot.
►
Position connector of foot control
c
so that marking
b
on the connector
is aligned with marking
a
on the connection socket for foot control
6
,
►
Plug the connector for foot control
c
firmly into the connection socket
for foot control
6
.
Fig. 2
Connecting the foot control
Legend
a
Marking for connection socket
b
Marking for connector
c
Connector for foot control
a
b
c
Document No.: IFU - Version: 3.0 - Document ID: SOP-AIC-5001568 Date/Time Printed/Viewed: 2022-04-13 15:59 (CET)
Effective
