AES global MultiCOM Cellular Series, Инструкция по установке и эксплуатации

Страница: 34 / 56

P a g e
| 34
Settings
Enable latching relay by DTMF
(default off)
Enable callerID by all phone
numbers (default off)
Program the phone
number of the SIM card
here, and set for daily
SMS (1) to recalibrate
time every day
Restore defaults and
delete all data on the
intercom
Set start and end times for
visitor calls to be enabled.
Green section=enabled.
Red = disabled.
Use 24hr format, no colon
Show / hide pin code
entry on screen
Enter new screen
instructions / welcome
message (max 128 char)
Set network APN for
4G connectivity (check
APN for your network.
This can usually be
found online)
Change default engineer code (9999)
or default manager code (5555)
Set auto trigger, latch and unlatch
times to create time clock auto control
Set ringing time to attempt
calling each number before
dialling the next number.
Change relay trigger times for relay
trigger by DTMF. Note: Keypad pin code
relay times override this setting when
code entered
TIP: #
character not permitted, to display # use “@” character.
/ creates a new
line.
= at the start means centre align
For example: =Enter address/ or scroll then/ press @ to CALL/