9
REMOVING THE FILTER ASSEMBLY
UNINSTALLING THE OPTIONAL HEPA FILTER SHEET
(CONTINUED)
1. Unplug unit.
2. Press the top of the Back Cover to
release the back panel.
3. Lift up to remove the back
panel.
4. Press the tab down release
the Filter Assembly.
5. Lift the Filter Assembly up and
out to remove.
WARNING:
Unplug the unit before performing any maintenance procedures.
WARNING:
Do not operate the Aerus Pure & Clean without the Filter Assembly and Back Cover properly installed.
3. Replace the Back Cover
by inserting the bottom
in first and snapping
into place.
2. Replace the Filter Assembly,
inserting the bottom of the Filter
Assembly first.
Remove the Filter Assembly (see
below).
1a.
Remove the HEPA Filter Sheet on top
of the Prefilter.
1b.
