7
When maintenance is required, the Display Screen will brighten and flash and the maintenance reminder will appear.
MAINTENANCE REMINDERS
PERFORM CLEANING
(approx. every 30 days)
• Clean the Filter Assembly (see page 8)
• Vacuum the ActivePure® Cells
• Vacuum Top and Rear Grill Openings
NOTE:
Be sure to press the Reminder Reset icon to clear the reminder following regular maintenance (see below).
When the CLEAN indicator starts flashing, it reminds you need to clean the filter.
Follow the steps below to remove the filter and clean it. Long press the RESET icon for 3 seconds under the power-on state, you will hear a beep
sound to let you know the reminder has been cleared.
WARNING:
Unplug the unit before performing any maintenance procedures.
WARNING:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
WARNING:
Do not operate the Aerus Pure & Clean without the Filter Assembly and Back Cover properly installed.
REPLACE ACTIVEPURE® CELL
The ActivePure® Cell is no longer working correctly.
• Replace the ActivePure® Cell (replacement cells are available from your local Independent Distributor/Contractor)
NOTE:
The ActivePure® Cell should be replaced every two (2) years, even if the unit does not display this message.
When the CELL indicator starts flashing, you will need to perform the following operations to reset:
•
After 1 year of cumulative use, the CELL indicator starts flashing. After the user replaces the new Active Pure® Cell according to the operation
steps on page 11 of the manual, long press the RESET icon for 3 seconds under the power off I standby state, you will hear a beep sound to let
you know the reminder has been cleared.
When the CELL indicator starts flashing in red, you will need to perform the following operations to reset:
•
The Cell indicator flashes in red to remind the user that Active Pure® Cell is not properly installed. After disconnecting the power supply,
reinstall Active Pure® Cell and check whether the socket is installed properly. After the installation is successful, there is no need to press the
RESET icon, the red light will automatically turn off. After the above operations, if the indicator remains flashing in red, ActivePure® Cell is
possibly damaged.
RESETTING THE REMINDERS
The reminders you need to reset are the PERFORM CLEANING and REPLACE ACTIVEPURE® CELL indicators (after performing maintenance, press the
Reset icon and the screen will stop flashing to let you know the reminder has been cleared, please see above instructions for each indicator.)
