6
If a maintenance reminder or a service reminder appears, the
backlight will brighten and constantly flash until the Reminder Reset
icon is pressed or the service problem is corrected.
The Aerus Pure & Clean can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE:
If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage up to the total
ventilated indoor area. Otherwise, set the coverage up to the size of the room.
The LED Screen is used to display all current settings (see page 5) as
well as any maintenance reminders.
SETTINGS & ADJUSTMENTS
LED DISPLAY
POWER (stand by)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode (ActivePure® and Ionization) and A·PURE x2 Mode (ActivePure® Cells and Ionization).
REMINDER RESET
Clears the maintenance reminders after performing routine maintenance.
x2
x2
Power ON/OFF
Reminder Reset
Fan UP
Fan DOWN
A·PURE / A·PURE x2
Modes (A·PURE / A·PURE x2)
Fan Speed
(5 Levels)
Clean Filter
Assembly
Ion
Operation
Flicker:
Replace ActivePure® Cell
Red Light:
ActivePure® Cell Malfunction
