5
1. Adjust the fan speed to your preference, keeping in mind that higher fan speeds will give better results.
2. Using the A·PURE/A·PURE x2 button, set the unit to A·PURE, for typical use, or A·PURE x2, for increased smoke and odor control.
Suggested locations listed in the order of preference:
1. Nearest the source of the worst pollution.
2. Near a cold-air return to thoroughly circulate the benefits of your Aerus Pure & Clean
throughout the area.
3. In the area most heavily used to achieve maximum benefit.
NOTE:
The rear of the unit should always have at least one inch of open area to allow
unrestricted airflow.
x2
OPERATION
PLACEMENT OF UNIT
x2
x2
x2
Fan Speed
ActivePure®
Setting
Fan Setting
CAUTION:
To prevent injury, be sure the power cord is not accessible to small children.
A·PURE MODE:
The unit’s display shows the fan speed (low to high) and
A·PURE to indicate that the ActivePure® Cell and ionization are both
functioning normally.
A·PURE x2 MODE:
A·PURE x2 lights up, indicates that (2) ActivePure® Cells and
ionization are both functioning normally.
ION MODE:
Ion lights up, indicates only ionization is functioning.
POWER OUTAGES:
Memory before power off settings.
