8
CLEANING THE ACTIVEPURE® CELLS
Remove the ActivePure® Cells and carefully vacuum accumulated lint Do not wash the ActivePure® Cells. Damage from water may result.
FILTER ASSEMBLY CLEANING
1. When visibly dirty, simply remove the Rear Filter Assembly from the unit (see pages 7 - 8), and with a hand-held vacuum, remove the heavy
particulate. This method will extend the life of the Filter Assembly.
2. If the Filter Assembly can’t be cleaned by vacuuming, replace the Filter Assembly.
FILTER ASSEMBLY REPLACEMENT
Contact your Independent Distributor/Contractor for replacement filters. See pages 8 - 9 for removal and installation instructions.
NOTE:
Filter Assembly life will vary based on the operating environment.
CHANGING THE ACTIVEPURE® CELL
The ActivePure® Cell should be replaced when REPLACE ACTIVEPURE® CELL appears on the display, or twelve (12) months when used continuously
or two (2) years if used less than 12 hours a day, whichever comes first. To change the ActivePure® Cell, follow the instructions on page 10.
GENERAL MAINTENANCE
WARNING:
Unplug the unit before performing any maintenance procedures.
UNINSTALLING THE OPTIONAL HEPA FILTER SHEET
WARNING:
Unplug the unit before performing any maintenance procedures.
The Optional HEPA Filter Sheet is designed specifically for areas with tobacco smoke, multiple pets, or anywhere excessive levels of contamination
are in the air.
• Protects your air purifier from indoor contaminants, which may shorten the life of your product
• Reduces monthly maintenance and cleaning time up to 90%
• Helps reduce odors
• Great in kitchen environments
• Helps reduce VOC’s and other contaminants
NOTE:
Removing the optional HEPA filter sheet will increase the airflow of the unit.
Periodic maintenance is required to ensure that your Aerus Pure & Clean operates properly. The unit will display a PERFORM CLEANING reminder
when it's time to perform regular maintenance. If you are operating your unit in a severely polluted environment, cleaning of the unit, ActivePure®
Cell, and Filter Assembly should be done more frequently. Shown here are basic procedures that should be carried out to keep your unit running at
top performance.
For optimal performance, and to prevent damage not covered by your warranty, install the Optional HEPA Filter. Failure to perform routine
maintenance could adversely affect the proper function of the unit or cause it to fail prematurely.
NOTE:
If a unit is returned for repair, and it is determined that neglect of the unit or unauthorized tampering with any mechanical or electronic
component of the unit caused the failure, Aerus reserves the right to void the product warranty. This will require the owner to pay for any
required repairs.
CLEANING THE CASE
Wipe the unit with a soft cloth dampened (not wet) with water. Do not use chemicals or solvents. Vacuum the Top and Rear Grills periodically to
remove any lint buildup.
