17
Elevator Servo Installation
1. Gather elevator servo , mounting screws, servo
arm and 18” extension as shown.
Note:
We recommended using a 1” or 1 1/4”
servo arm for best results.
Note:
Recommended Servo Requirements:
(min. 140 in./oz. Digital, Metal Geared)
2.
Plug the elevator servo leads into the extension
as shown.
3.
Secure the servo connectors with safety wire,
string, tape, or other method. Ensure the con-
nectors will not come apart from vibration or
light tension.
5.
Elevator control horn installed on bottom of
elevator.
