59
9. Use a felt tip pen to trace the location of the
glow plug access hole onto the side of the cowl
as shown.
Note:
Always check that the marker selected can
be easily removed. Check on inconspicuous
spot prior to marking.
10. Use a drill, rotary cutting tool, or round file to cut
the glow plug access hole into the side of the
cowl. Ensure the hole is large enough to insert
the glow plug igniter through.
Note:
Make any necessary holes for the
engine carburetor adjustment needles where
necessary.
11.
Cut a relief hole into the muffler pipe template
to allow the template to lay flush on the bottom
of the cowl as shown. Use a felt tip pen to
trace the muffler pipe cutout onto the bottom of
the cowl as shown.
12.
Remove the cowl and use a rotary cutting tool
to cut out the muffler pipe opening in the bot-
tom of the cowl as shown.
