Aeroworks 30cc Freestyle Extra 260 Assembly Manual
9
10. Layout the servo as shown below. Install the
extension at this time and double check exten-
sion length.
11. Attach the 6” servo extension to the servo wire
and secure using an Aeroworks Safety Clip.
9. With aileron centered in natural position, ensure
the mounting hole of the control horn is centered
on the hinge line as shown. Double check this
alignment while the epoxy cures, it is very im-
portant that the control horn is correctly aligned
with the hinge line.
12. Fasten the pull string from the servo hole to the
male plug of the servo extension.
14. Install servo in servo well with the output arm
toward the leading edge of the wing. Drill holes
for servo mounting screws.
13. Pull aileron servo extension through root end of
wing.
8. Place aileron control horn into the pre-cut slot.
Wipe away any excess epoxy that may have
come out at this time. Ensure that the base plate
is making full contact with the aileron at this
