AeroWorks 100cc YAK-54 ARF-QB, Инструкция по сборке

Страница: 4 / 89

4
INTRODUCTION
Your new 100cc YAK-54 ARF- QB is a highly aerobatic airplane. It is capable of both pre-
cision and 3-D maneuvers. The aircraft builds easily, quickly, and precisely due to its state
of the art CAD design, LASER cut technology, and high quality included hardware. We
hope you enjoy building and flying your 100cc YAK-54 ARF-
QB .
Great care has been taken in both the design and manufacturing of the 100cc YAK-54 ARF-
QB to allow for the strongest and lightest construction possible. Only the highest quality ma-
terials from the covering, paint, wood and hardware have been used in the construction of
this model.
The 100cc YAK-54ARF-
QB has been individually hand built, covered and painted by
trained and experienced craftsmen with over 25 years of manufacturing experience. Using
CAD design, laser cut technology and jig-built assures accuracy in all stages of production.
The 100cc YAK-54ARF-
QB is designed for gas engines in the 100cc category. The DA-
100cc engine is shown in the assembly instructions. The aircraft was tested with the DA-
100cc and has outstanding performance. The final choice of engine is left up to the builder.
A computer radio is recommended to allow the pilot to take advantage of the full capabilities
of this aerobatic aircraft.
IMPORTANT Please read through this assembly manual carefully, before starting the as-
sembly of your new 100cc YAK-54ARF- QB . Inventory and inspect all parts and hardware
for any imperfections or damage. Please notify
Aeroworks immediately
if there are
missing or damaged parts.
INTENDED USE
This plane should not be regarded as a toy. This is an aerobatic plane and is recommended for pilots
who are beyond the trainer-stage and are comfortable with flying an aerobatic sport plane.
!READ! WARRANTY !READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. If you wish to return this air-
craft for any reason a 15% restock fee will be charged to the customer. In addition the cus-
tomer is responsible for all return shipping cost and all prior shipping cost will not be re-
funded. Parts will be exchanged or replaced once the original item is returned at the owner’s
expense. If you have any problems or questions, please contact Aeroworks.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore,
The purchaser/operator accepts all responsibility of any and all structural or
mechanical failures.