Aerotech Automation1 XI4-4P1 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 78

background image

Handling and Storage

Unpacking the Chassis

IMPORTANT

: All electronic equipment and instrumentation is wrapped in antistatic

material and packaged with desiccant. Ensure that the antistatic material is not
damaged during unpacking.

Inspect the shipping container for any evidence of shipping damage. If any damage exists, notify the
shipping carrier immediately.

Remove the packing list from the shipping container. Make sure that all the items specified on the
packing list are contained within the package.

The documentation for the controller is on the included installation device. The documents include
manuals, interconnection drawings, and other documentation pertaining to the system. Save this
information for future reference. Additional information about the system is provided on the Serial
and Power labels that are placed on the chassis.

The system serial number label contains important information such as the:

l

Customer order number (please provide this number when requesting product support)

l

Drawing number

l

System part number

Handling

IMPORTANT

: It is the responsibility of the customer to safely and carefully lift and

move the controller.

l

Be careful when you move or transport the controller.

l

Refer to

Section 1.2. Mechanical Specifications

for dimensions and weight spe-

cifications.

l

Retain the shipping materials for future use.

l

Transport or store the controller in its protective packaging.

WARNING: Electrostatic Discharge (ESD) Sensitive Components!

You could damage the power supply or drives if you fail to observe the correct
ESD practices.

Wear an ESD wrist strap when you handle, install, or do service to the system assembly.

Storage

Store the controller in the original shipping container. If the original packaging included
ESD protective packaging, make sure to store the controller in it. The storage location must be:

l

dry

l

free of dust

l

free of vibrations

l

flat

Refer to

Section 1.3. Environmental Specifications

Handling and Storage

iXI4/XI4 Hardware Manual

12

www.aerotech.com

«
...
10
11
12
13
14
...
»

Содержание Automation1 XI4-4P1















































































Отзывы:

Нет отзывов

Похожие инструкции для Automation1 XI4-4P1

Бренд: Vacon Страницы: 62

Бренд: Eaton Страницы: 50

Бренд: FAAC Страницы: 12

Бренд: Samsung Страницы: 32

Бренд: NCR Страницы: 8

Бренд: Watts Страницы: 4

Бренд: Zeta Страницы: 44

Бренд: Elby Designs Страницы: 4

Бренд: Watts Страницы: 17

Бренд: Tamiya Страницы: 5

STRATOSTM INSPIRE

Бренд: Ultrahaptics Страницы: 7

Бренд: Yoshitake Страницы: 21

Бренд: Oasis Страницы: 7

Бренд: ccei Страницы: 16

Бренд: K+R Performance Engineering Страницы: 12

CONPAL NCB-8C-SR

Бренд: Nabtesco Страницы: 24

Бренд: zeeltronic Страницы: 15

Бренд: M-system Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды