Aerotech Automation1 XI4-4P1 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 78

background image

Safety Procedures and Warnings

IMPORTANT

: This manual tells you how to carefully and correctly use and operate the

controller.

l

Read all parts of this manual before you install or operate the controller or before
you do maintenance to your system.

l

To prevent injury to you and damage to the equipment, obey the precautions in this
manual.

l

All specifications and illustrations are for reference only and were complete and
accurate as of the release of this manual. To find the newest information about this
product, refer to www.aerotech.com.

If you do not understand the information in this manual, contact Aerotech Global
Technical Support.

IMPORTANT

: This product has been designed for light industrial manufacturing or

laboratory environments. If the product is used in a manner not specified by the
manufacturer:

l

The protection provided by the equipment could be impaired.

l

The life expectancy of the product could be decreased.

Safety notes and symbols are placed throughout this manual to warn you of the potential risks at the
moment of the safety note or if you fail to obey the safety note.

The voltage can cause shock, burn, or death.

You are at risk of physical injury.
You could damage the controller.

A surface can be hot enough to burn you.

Your actions, the temperature of the system, or the condition of the atmosphere
that surround the system could start a fire.

Components are sensitive to electrostatic discharge.

Unsecured cables could cause you to:

l

trip and fall

l

drag the product off of its mounting location

l

damage the cable connections.

A blue circle symbol is an action or tip that you should obey. Some examples
include:

l

General tip

l

Read the manual/section

l

Wear protective safety equipment (eye protection, ear protection, gloves)

l

If applicable, do not lift unassisted

iXI4/XI4 Hardware Manual

Safety Procedures and Warnings

www.aerotech.com

11

«
...
9
10
11
12
13
...
»

Содержание Automation1 XI4-4P1















































































Отзывы:

Нет отзывов

Похожие инструкции для Automation1 XI4-4P1

Бренд: Bang & Olufsen Страницы: 9

Бренд: Bang & Olufsen Страницы: 12

Бренд: Hach Страницы: 86

Бренд: Wave Italy Страницы: 16

Бренд: TA Hydronics Страницы: 14

Бренд: Unipulse Страницы: 99

Бренд: Accutrol Страницы: 25

Бренд: Mainpine Страницы: 16

Бренд: Danfoss Страницы: 20

Бренд: Eaton Страницы: 12

Бренд: Gatekeeper Страницы: 28

Бренд: Watlow Страницы: 59

Tekmar WiFi Snow Melting Control 670

Бренд: Watts Страницы: 48

FT-2000 - MENU MODE LIST

Бренд: Yaesu Страницы: 56

Бренд: Paradox Страницы: 6

Бренд: 2gig Technologies Страницы: 6

Бренд: Harman Страницы: 20

Бренд: One for All Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды