background image

4

Before You Start

tools

This product is supplied with the basic tools required for assembly.

assembly

Assemble in a clean, clear area. Give yourself plenty of space to easily move around the product, as this will re-
duce your chance of getting injured while assembling. You might also find it quicker and safer if you work with a 
friend when handling large parts.

check you have everything

Carefully unpack each component and check that you have all the parts against the Parts List before starting to 
assemble your product. Remember, a number of parts will be factory fitted to the larger component. If any are 
missing, please contact our Customer Care staff for assistance.

safety

Before you begin any programme of exercise, please be sure to consult with your doctor. Proper use of your product 
is also essential. Please read this manual carefully before starting assembly of your product or starting to exercise.

•  Use this product only as described in this manual (or on video).
•  Refer to illustrations or video for any complicated manoeuvres.
•  Make sure that all nuts, bolts, screws, and knobs are tight prior to each use.
•  Do not exercise at an intensity that causes the product to move. This could result in damage to joints and 

the product.

•  Setup on a level surface.  Do not position on loose rugs or uneven surfaces.
•  Tighten/replace loose or worn components prior to use.
•  Choose a workout which best fits your physical strength/flexibility level. Use common sense while exercising.
•  Injuries may result from incorrect or excessive exercise.
•  Wear appropriate clothing when exercising; do not wear loose clothing that could become caught or trapped.  

Keep hands clear of any folding or pinch points.

•  Keep all children and pets away from the product at all times including while using or while assembling.
•  Be careful to maintain your balance while using, mounting, dismounting, or assembling
  the product. Loss of balance may result in a fall and serious bodily injury.
•  Please use this product one person at a time.
•  Ensure a free space of 3.5m x 2.0m is available before use
•  Make sure all adjustment devices are not left protruding where they may be accidentally changed or caught upon.

storage and use

This product is designed for indoor use in clean dry conditions. Do not store in cold or damp conditions as this 
may  cause  corrosion.  It  is  recommended  that  two  people  move  the  AeroPilates.  Attach  one  of  the  TENSION 
CORDS(10) in the slot on the FRONT FRAME(1) to prevent the CARRIAGE(7) from moving. Lift from the REAR 
FRAME(2) and use the Wheels(27) on the FRONT FRAME(1).

weight limit

This product is suitable for users weighing 300lbs/21.5 stones/136kg or less.

Содержание SPPP-AE695















Отзывы: