7
Step 4
Remove the paper covering from the foam tape inside the FRONT COVER(3) and REAR
COVER(4). Place the FRONT COVER(3) over the FRONT FRAME(1). Place the REAR
COVER(4) over the REAR FRAME(2). Press the covers securely in place.
Step 5
Insert the FOOTBAR(5) into the mounting holes located in the FRONT COVER(3) and
FRONT FRAME(1). Lock in place with the LOCKING KNOBS(26).
Note:
You can choose to insert the CARDIO REBOUNDER(50) into the FRONT FRAME(1)
and lock in position with the LOCKING KNOBS(26). Refer to the inset drawing.
Step 6
Insert the PULLEY RISERS(25) into the mounting holes located on the REAR COVER(4) and
REAR FRAME(2) and lock in position with the LOCKING KNOBS(26).
Step 7
(see illustration)
Hook the LEFT PULLEY HOOK(23) into one of the five attachment holes on the PULLEY
RISER(25) at left side. Hook the RIGHT PULLEY HOOK(24) into one of the five attachment
holes on the PULLEY RISER(25) at right side.
Assembly
Step 7
Step 5, Note
Step 4, 5, 6 and 7
