background image

11

Maintenance

The safety and integrity designed into the AeroPilates can only be maintained when regularly examined for 
damage and wear. Special attention should be given to the following: 

1.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

2.  Worn or damaged components shall be replaced immediately or the AeroPilates removed from service 

until repair is made. 

3.  Verify that the ROPES(18) are properly installed on the PULLEY SETS(22). 

4.  Check the condition of the ROPES(18).  Replace the Rope if it is frayed or worn. 

5.  Check the PLASTIC SNAP HOOKS(19) on the ends of the ROPES(18). Replace the ROPES(18) if 

PLASTIC SNAP HOOKS(19) are damaged or deformed.

6.  Check the TENSION CORDS(10). If a TENSION CORD(10) is stretched and loose, re-tie the knot on the 

end of the cord. Replace TENSION CORDS(10) that are frayed or worn.

7.  Check the BUNGEE CORD(52) on the CARDIO REBOUNDER(50) for wear. Replace the CARDIO 

REBOUNDER(50) if the BUNGEE CORD(52) is frayed or worn.

8.  Check the PULLEY SETS(22) for excessive wear. Replace worn PULLEY SETS(22).

9.  Check the HAND STRAPS(20) for damage. Replace damaged parts.

10.  Check the FOAM SLEEVE(6) and FOAM SHOULDER PADS(16) and replace if damaged or worn.

11.  Check the STOP PLATES(30, 31) for looseness or damage and replace any damaged parts.

12.  Check the CUSHION(13) and replace if it is damaged or worn.

13.  Check and clean the ROLLERS(8) and the rolling surfaces on the rails. Clean by wiping with a dry cloth.

14.  Keep clean by wiping with an absorbent cloth after use.

Содержание SPPP-AE695















Отзывы: