20
Aerogen
Troubleshooting
If these suggestions do not correct the problem, discontinue use of any device that
appears to be damaged or is not operating properly and contact your local Aerogen
product sales representative.
Table 2.
Aeroneb Pro-X Troubleshooting
If this happens:
It could mean:
Try this:
The 30 Min. indicator
flashes during
nebulization.
Battery power is low.
Recharge battery
(see Recharging the battery).
Battery will not
recharge.
Controller is connected
to the AC/DC adapter
and the battery
charging light is
illuminated green and
the 30 Min. indicator
light is flashing.
It may be time to replace the
battery.
Contact your local Aerogen
product sales representative.
Battery will not retain
initial charge.
Rechargeable battery may need to
be replaced.
Contact your local Aerogen
product sales representative.
The 30 Min. or
Continuous light
illuminates, but aerosol
is not visible.
No medication in nebulizer.
Refill medication through filler cap
in the nebulizer (see page 15).
It may be time to replace the
nebulizer.
See Warranty and Life of Product.
Refer to Aeroneb Solo parts list.
30 Min. or Continuous
indicator does not light
when on/off power
button is pressed.
There is no power to the System.
Verify that AC/DC adapter is
securely attached to controller.
Rechargeable battery is depleted.
Recharge battery (see
Recharging the battery).
Содержание Aeroneb Solo
Страница 1: ...www aerogen com Aeroneb Solo System Instruction Manual...
Страница 2: ......
Страница 35: ......