Aerogen Aerogen USB Controller, Инструкция по эксплуатации

Страница: 38 / 72

36
Aerogen
®
Power
Power Source:
The Aerogen USB Controller operates from an AC/DC
Adapter (Input 100 to 240VAC, 50 – 60 Hz/200-100mA, Output 5VDC, 1.5A)
Note:
The Aerogen USB Controller is approved for use with Aerogen
USB Controller AC/DC Adapter AG-UC1040-US (Manufacturer Reference:
FRIWO FW7721M)
*
Consult your local representative for the order number extension specific to
your country.
Power Consumption:
≤ 2.0 Watts (nebulizing).
Patient Isolation: Aerogen USB Controller circuitry provides 4 kilovolt
(kV) patient isolation and complies with IEC/EN 60601-1.
Electromagnetic Susceptibility
This device meets the requirements of the Electromagnetic Compatibility
(EMC), pursuant to the Collateral Standard, IEC/EN 60601-1-2 Edition 3:
2007 which addresses EMC in North America, Europe and other global
communities. This includes immunity to radio frequency electric fields and
electrostatic discharge, in addition to the other applicable requirements of
the standard. Compliance with EMC standards does not mean a device
has total immunity; certain devices (cellular phones, pagers, etc.) can
interrupt operation if they are used near medical equipment.
Note:
This device is classified as Class II Type BF, transit operable,
portable medical electrical equipment and the device complies with
specified safety levels for electrical isolation and leakage current. The
Aerogen USB Controller AC/DC Adapter has no connection to earth
ground because the necessary level of protection is achieved through the
use of double insulation.
Refer to Appendix 1 for EMC tables as per IEC/EN 60601-1-2 Edition 3:
2007.