Aerogen Aerogen USB Controller, Инструкция по эксплуатации

Страница: 11 / 72

Aerogen
®
USB Controller System Instruction Manual
9
System Warnings
Read and study all instructions before using the Aerogen USB Controller
System.
Only trained persons should operate the Aerogen USB Controller System,
Aerogen Solo, Aerogen Pro and associated accessories.
If this product is being used to treat a life threatening condition, a backup
device is necessary.
During use observe for correct functioning of the nebulizer by regularly
verifying aerosol is visible and that no amber indicator lights are illuminated.
Do not use a filter or heat-moisture exchanger (HME) between the nebulizer
and patient airway.
Only use with HME devices whose manufacturer’s instructions allow use
with a nebulizer, and always follow the HME manufacturer’s instructions.
Ensure that the total combined volume of nebulizer, T-piece and HME is
suitable for the tidal volume being delivered and does not increase dead
space to the extent that it adversely impacts the ventilatory parameters of
the patient.
Always monitor the resistance to flow and excessive rain-out and change
the HME device as per manufacturer’s instructions.
The Aerogen nebulizers, T-pieces and accessories are not sterile.
The components and accessories of the Aerogen USB Controller System
are not made with natural rubber latex.
Only use physician-prescribed solutions that are approved for use with
a general purpose nebulizer. Consult drug manufacturer’s instructions
regarding suitability for nebulization.