AERMEC ANL 100HA, Техническое руководство по установке

Страница: 24 / 36

eN
1205. 6755517_02
24
18. geNerAL wArNINgS For tHe
INStALLer
AERMEC ANLs are constructed according to the re-
cognised technical standards and safety regulations.
Any contractual or extracontractual liability of the
Company is excluded for injury/damage to persons,
animals or objects owing to installation, regula-
tion and maintenance errors or improper use. All
uses not expressly indicated in this manual are
prohibited.
18.1. PreSerVAtIoN oF tHe DoCUMeN
-
tAtIoN
1.
The instructions along with all the related
documentation must be given to the user
of the system, who assumes the responsi-
bility to conserve the instructions so that
they are always at hand in case of need.
2.
read this sheet carefully; the execution of
all works must be performed by qualified
staff, according to standards in force ion
this subject in different countries.
3. The appliance must be installed in such
a way as to enable maintenance and/or
repairs to be carried out.
4. The appliance warranty does not cover
the costs for ladder trucks, scaffolding, or
other elevation systems that may become
necessary for carrying out servicing under
warranty.
5. Do not modify or tamper with the chiller
as dangerous situations can be created
and the manufacturer will not be liable
for any damage caused. The validity of the
warranty shall be void in the event of fai-
lure to comply with the above-mentioned
indications
.
18.2. wArNINgS regArDINg SAFetY
AND INStALLAtIoN StANDArDS
1.
Must be installed by a qualified and suitably
trained technician, in compliance with the
national legislation in force in the country of
destination.
AERMEC will not assume any responsibility
for damage due to failure to follow these
instructions.
2. Before beginning any operation, READ THESE
INSTRUCTIONS CAREFULLY AND CARRY OUT
THE SAFETY CHECKS TO REDUCE ALL RISK
OF DANGER TO A MINIMUM. All the staff
involved must have thorough knowledge of
the operations and any dangers that may
arise at the moment in which the installation
operations are carried out. te
CHNICAL
Se
C
tIoN
INS
tALLA
tIoN
Se
C
tIoN
USer
Se
C
tIoN
Standards and Directives respected on desi
-
gning and constructing the unit:
ProteCtIoN rAtINg
1. IP 24
ACOUSTIC PArT:
1. ISO DIS 9614/2
(inTEnsimETriC mETHod))
2.
soUnd poWEr (En iso 9614-2)
3. SOUND PRESSURE
(En iso 3744)
rEFrIGErAnT GAS:
This unit contains fluoride gases with green
-
house effect covered by the Kyoto Protocol.
Maintenance and disposal must only be
performed by qualified staff.
STAnDArD:
UL 1995
Heating and cooling equipment.
ANSI/NFPA
standard 70 national Electrical code (n.E.C.).
CSA C.22.1.- C.22.2
Safety Standard Electrical Installation.