Aeris F10 Скачать руководство пользователя страница 14

Страница: 14 / 84

BACKLIGHT

To turn the Backlight On, press and release the L button (lower/right) button
momentarily (< 2 seconds). The Backlight will remain On for the Duration time set
(a Set U selection) unless you turn it Off during that time.

• The Backlight will come On (even if set OFF) when Alarms strike and remain

On until turned Off or automatically after 10 seconds .

• Pressing and releasing the L button momentarily (< 2 seconds) while the

Backlight is On will turn it Off.

• Depressing the L button for 2 seconds while the Backlight is On, will reset the

timer and extend the On time to the full Duration time set.

• If the L button is depressed for > 60 seconds, the Backlight will be disabled

and not turn On until the button is released then pressed/released again.

• The Backlight will be disabled when there is a Low Battery condition, and be

re enabled once the battery is replaced.

• Extensive use of the Backlight reduces Battery use life.

• Turning the Backlight Off when it is not being used will help extend Battery

use life.

• The Backlight does not operate when the unit is connected to a PC.

Содержание F10





















































































Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды

Aeris F10, Руководство по эксплуатации

Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды